oklab()

Below are descriptions of the allowed values for both absolute and relative colors.

Absolute value syntax

oklab(L a b[ / A])

The parameters are as follows:

L

A <number> between 0 and 1, a <percentage> between 0% and 100%, or the keyword none (equivalent to 0% in this case). This value specifies the color's perceived lightness. The number 0 corresponds to 0% (black) and the number 1 corresponds to 100% (white).

a

A <number> between -0.4 and 0.4, a <percentage> between -100% and 100%, or the keyword none (equivalent to 0% in this case). This value specifies the color's distance along the a axis in the Oklab color space, which defines how green (moving towards -0.4) or red (moving towards +0.4) the color is. Note that these values are signed (allowing both positive and negative values) and theoretically unbounded, meaning that you can set values outside the ±0.4 (±100%) limits. In practice, values cannot exceed ±0.5.

b

A <number> between -0.4 and 0.4, a <percentage> between -100% and 100%, or the keyword none (equivalent to 0% in this case). This value specifies the color's distance along the b axis in the Oklab color space, which defines how blue (moving towards -0.4) or yellow (moving towards +0.4) the color is. Note that these values are signed (allowing both positive and negative values) and theoretically unbounded, meaning that you can set values outside the ±0.4 (±100%) limits. In practice, values cannot exceed ±0.5.

A Optional

An <alpha-value> representing the alpha channel value of the color, where the number 0 corresponds to 0% (fully transparent) and 1 corresponds to 100% (fully opaque). Additionally, the keyword none can be used to explicitly specify no alpha channel. If the A channel value is not explicitly specified, it defaults to 100%. If included, the value is preceded by a slash (/).

Relative value syntax

oklab(from <color> L a b[ / A])

The parameters are as follows:

from <color>

The keyword from is always included when defining a relative color, followed by a <color> value representing the origin color. This is the original color that the relative color is based on. The origin color can be any valid <color> syntax, including another relative color.

L

A <number> between 0 and 1, a <percentage> between 0% and 100%, or the keyword none (equivalent to 0% in this case). This value represents the lightness of the output color. The number 0 corresponds to 0% (black) and the number 1 corresponds to 100% (white).

a

A <number> between -0.4 and 0.4, a <percentage> between -100% and 100%, or the keyword none (equivalent to 0% in this case). This value represents the output color's distance along the a axis in the Oklab color space, which defines how green (moving towards -0.4) or red (moving towards +0.4) the color is. Note that these values are signed (allowing both positive and negative values) and theoretically unbounded, meaning that you can set values outside the ±0.4 (±100%) limits. In practice, values cannot exceed ±0.5.

b

A <number> between -0.4 and 0.4, a <percentage> between -100% and 100%, or the keyword none (equivalent to 0% in this case). This value represents the output color's distance along the b axis in the Oklab color space, which defines how blue (moving towards -0.4) or yellow (moving towards +0.4) the color is. Note that these values are signed (allowing both positive and negative values) and theoretically unbounded, meaning that you can set values outside the ±0.4 (±100%) limits. In practice, values cannot exceed ±0.5.

A Optional

An <alpha-value> representing the alpha channel value of the output color, where the number 0 corresponds to 0% (fully transparent) and 1 corresponds to 100% (fully opaque). Additionally, the keyword none can be used to explicitly specify no alpha channel. If the A channel value is not explicitly specified, it defaults to the alpha channel value of the origin color. If included, the value is preceded by a slash (/).

Defining relative color output channel components

When using relative color syntax inside an oklab() function, the browser converts the origin color into an equivalent Oklab color (if it is not already specified as such). The color defined as three distinct color channel values — l (lightness), a (green/red axis), and b (blue/yellow axis) — plus an alpha channel value (alpha). These channel values are made available inside the function to be used when defining the output color channel values:

• The l channel value is resolved to a <number> between 0 and 1, inclusive.
• The a and b channels are each resolved to a <number> between -0.4 and 0.4, inclusive.
• The alpha channel is resolved to a <number> between 0 and 1, inclusive.

When defining a relative color, the different channels of the output color can be expressed in several different ways. Below, we'll study some examples to illustrate these.

In the first two examples below, we are using relative color syntax. However, the first one outputs the same color as the origin color and the second one outputs a color not based on the origin color at all. They don't really create relative colors! You'd be unlikely to ever use these in a real codebase, and would probably just use an absolute color value instead. We included these examples as a starting point for learning about relative oklab() syntax.

Let's start with an origin color of hsl(0 100% 50%) (equivalent to red). The following function outputs the same color as the origin color — it uses the origin color's l, a, and b channel values (0.627966, 0.22488, and 0.125859) as the output channel values:

oklab(from hsl(0 100% 50%) l a b)

This function's output color is oklab(0.627966 0.22488 0.125859).

The next function uses absolute values for the output color's channel values, outputting a completely different color not based on the origin color:

oklab(from hsl(0 100% 50%) 42.1% 0.165 -0.101)

In the above case, the output color is oklab(0.421 0.165 -0.101).

The following function creates a relative color based on the origin color:

oklab(from hsl(0 100% 50%) l -0.3 b)

This example:

• Converts the hsl() origin color to an equivalent oklab() color — oklab(0.627966 0.22488 0.125859).
• Sets the L and b channel values for the output color to those of the origin oklab() equivalent's L and b channel values — those values are 0.627966 and 0.125859, respectively.
• Sets the output color's a channel value to a new value not based on the origin color: -0.3.

The final output color is oklab(0.627966 -0.3 0.125859).

In the examples we've seen so far in this section, the alpha channels have not been explicitly specified for either the origin or output colors. When the output color alpha channel is not specified, it defaults to the same value as the origin color alpha channel. When the origin color alpha channel is not specified (and it is not a relative color), it defaults to 1. Therefore, the origin and output alpha channel values are 1 for the above examples.

Let's look at some examples that specify origin and output alpha channel values. The first one specifies the output alpha channel value as being the same as the origin alpha channel value, whereas the second one specifies a different output alpha channel value, unrelated to the origin alpha channel value.

oklab(from hsl(0 100% 50% / 0.8) l a b / alpha)
/* Computed output color: oklab(0.627966 0.22488 0.125859 / 0.8) */

oklab(from hsl(0 100% 50% / 0.8) l a b / 0.5)
/* Computed output color: oklab(0.627966 0.22488 0.125859 / 0.5) */

In the following example, the hsl() origin color is again converted to the oklab() equivalent — oklab(0.627966 0.22488 0.125859). calc() calculations are applied to the L, a, b, and A values, resulting in an output color of oklab(0.827966 0.14488 -0.0741406 / 0.9):

oklab(from hsl(0 100% 50%) calc(l + 0.2) calc(a - 0.08) calc(b - 0.2) / calc(alpha - 0.1))

<oklab()> = 
  oklab( [ <percentage> | <number> | none ] [ <percentage> | <number> | none ] [ <percentage> | <number> | none ] [ / [ <alpha-value> | none ] ]? )  

<alpha-value> = 
  <number>      |
  <percentage>  

The following example shows the effect of varying the lightness, a-axis, and b-axis values of the oklab() function.

HTML

<div data-color="red-dark"></div>
<div data-color="red"></div>
<div data-color="red-light"></div>

<div data-color="green-dark"></div>
<div data-color="green"></div>
<div data-color="green-light"></div>

<div data-color="blue-dark"></div>
<div data-color="blue"></div>
<div data-color="blue-light"></div>

CSS

body {
  display: flex;
  flex-wrap: wrap;
  gap: 10px;
}
div {
  height: 50px;
  flex: 0 0 28%;
  border: 1px solid black;
}

[data-color="red-dark"] {
  background-color: oklab(0.05 0.4 0.4);
}
[data-color="red"] {
  background-color: oklab(0.5 0.4 0.4);
}
[data-color="red-light"] {
  background-color: oklab(0.95 0.4 0.4);
}

[data-color="green-dark"] {
  background-color: oklab(5% -100% 0.4);
}
[data-color="green"] {
  background-color: oklab(50% -100% 0.4);
}
[data-color="green-light"] {
  background-color: oklab(95% -100% 0.4);
}

[data-color="blue-dark"] {
  background-color: oklab(0.05 -0.3 -0.4);
}
[data-color="blue"] {
  background-color: oklab(0.5 -0.3 -0.4);
}
[data-color="blue-light"] {
  background-color: oklab(0.95 -0.3 -0.4);
}

Result

The following example shows the effect of varying the A (alpha) value of the oklab() function. The red and red-alpha elements overlap the #background-div element to demonstrate the effect of opacity. Giving the red-alpha element an opacity of 0.4 makes it appear more transparent than the red element.

HTML

<div id="background-div">
  <div data-color="red"></div>
  <div data-color="red-alpha"></div>
</div>

CSS

div {
  width: 50px;
  height: 50px;
  padding: 5px;
  margin: 5px;
  display: inline-block;
  border: 1px solid black;
}
#background-div {
  background-color: lightblue;
  width: 150px;
  height: 40px;
}

[data-color="red"] {
  background-color: oklab(0.628 0.225 0.126);
}
[data-color="red-alpha"] {
  background-color: oklab(0.628 0.225 0.126 / 0.4);
}

Result

This example demonstrates the effects of setting the a and b values of the oklab() function to the ends and midpoints of the a-axis and b-axis, respectively. The a-axis goes from green (-0.4) to red (0.4) and the b-axis goes from yellow (-0.4) to blue (0.4).

HTML

<div data-color="redyellow"></div>
<div data-color="redzero"></div>
<div data-color="redblue"></div>

<div data-color="zeroyellow"></div>
<div data-color="zerozero"></div>
<div data-color="zeroblue"></div>

<div data-color="greenyellow"></div>
<div data-color="greenzero"></div>
<div data-color="greenblue"></div>

CSS

Using the CSS background-color property, we vary the a and b values of the oklab() color function along the a-axis and b-axis, showing the effects of maximum, midpoint, and minimum values in each case.

body {
  display: grid;
  grid-template-columns: 1fr 1fr 1fr;
  gap: 10px;
}
div {
  height: 50px;
  flex: 0 0 28%;
  border: 1px solid black;
}

/* a-axis max, variable b-axis */
[data-color="redyellow"] {
  background-color: oklab(0.5 0.4 0.4);
}
[data-color="redzero"] {
  background-color: oklab(0.5 0.4 0);
}
[data-color="redblue"] {
  background-color: oklab(0.5 0.4 -0.4);
}

/* a-axis center, variable b-axis */
[data-color="zeroyellow"] {
  background-color: oklab(0.5 0 0.4);
}
[data-color="zerozero"] {
  background-color: oklab(0.5 0 0);
}
[data-color="zeroblue"] {
  background-color: oklab(0.5 0 -0.4);
}

/* a-axis min, variable b-axis */
[data-color="greenyellow"] {
  background-color: oklab(0.5 -0.4 0.4);
}
[data-color="greenzero"] {
  background-color: oklab(0.5 -0.4 0);
}
[data-color="greenblue"] {
  background-color: oklab(0.5 -0.4 -0.4);
}

Result

The left column is at the yellow end (-0.4) of the b-axis and the right column is at the blue end (0.4). The top row displays colors at the red end of the a-axis (-0.4) and the bottom row is at the green end (0.4). The middle column and row are at the midpoints of each axis, with the middle cell being grey; it contains no red, green, yellow, or blue, with a 0 value for both axes.

This example includes linear gradients to demonstrate the progression of values of the oklab() function along the a-axis (from red to green) and along the b-axis (from yellow to blue). In each gradient image, one axis remains static while the other axis progresses from low to high values.

<div data-color="redtogreen-yellow">
  <span>red</span><span>`b`= -0.4 (yellow)</span><span>green</span>
</div>
<div data-color="redtogreen-zero">
  <span>red</span><span>no yellow or blue</span><span>green</span>
</div>
<div data-color="redtogreen-blue">
  <span>red</span><span>`b`= 0.4 (blue)</span><span>green</span>
</div>

<div data-color="yellowtoblue-red">
  <span>yellow</span><span>`a` = -0.4 (red)</span><span>blue</span>
</div>
<div data-color="yellowtoblue-zero">
  <span>yellow</span><span>no red or green</span><span>blue</span>
</div>
<div data-color="yellowtoblue-green">
  <span>yellow</span><span>`a` = 0.4 (green)</span><span>blue</span>
</div>

CSS

div {
  height: 50px;
  padding: 5px;
  margin: 5px;
  border: 1px solid black;
  display: flex;
  justify-content: space-between;
  align-items: center;
}
span {
  background-color: #ffffffcc;
  padding: 3px;
}

/* a-axis gradients */
[data-color="redtogreen-yellow"] {
  background-image: linear-gradient(to right, oklab(50% 0.4 0.4), oklab(50% -0.4 0.4));
}
[data-color="redtogreen-zero"] {
  background-image: linear-gradient(to right, oklab(50% 0.4 0), oklab(50% -0.4 0));
}
[data-color="redtogreen-blue"] {
  background-image: linear-gradient(to right, oklab(50% 0.4 -0.4), oklab(50% -0.4 -0.4));
}

/* b-axis gradients */
[data-color="yellowtoblue-red"] {
  background-image: linear-gradient(to right, oklab(50% 0.4 0.4), oklab(50% 0.4 -0.4));
}
[data-color="yellowtoblue-zero"] {
  background-image: linear-gradient(to right, oklab(50% 0 0.4), oklab(50% 0 -0.4));
}
[data-color="yellowtoblue-green"] {
  background-image: linear-gradient(to right, oklab(50% -0.4 0.4),oklab(50% -0.4 -0.4));
}

Result

This example styles three <div> elements with different background colors. The middle one is given the unmodified --base-color, while the left and right ones are given lightened and darkened variants of that --base-color.

These variants are defined using relative colors — the --base-color custom property is passed into an oklab() function, and the output colors have their lightness channel modified to achieve the desired effect via a calc() function. The lightened color has 0.15 (15%) added to the lightness channel, and the darkened color has 0.15 (15%) subtracted from the lightness channel.

<div id="container">
  <div class="item" id="one"></div>
  <div class="item" id="two"></div>
  <div class="item" id="three"></div>
</div>

CSS

#container {
  display: flex;
  width: 100vw;
  height: 100vh;
  box-sizing: border-box;
}

.item {
  flex: 1;
  margin: 20px;
}

:root {
  --base-color: orange;
}

#one {
  background-color: oklab(from var(--base-color) calc(l + 0.15) a b);
}

#two {
  background-color: var(--base-color);
}

#three {
  background-color: oklab(from var(--base-color) calc(l - 0.15) a b);
}

Result

The output is as follows:

• The <color> data type for a list of all color notations
• lab() and oklch() color functions
• Using relative colors
• CSS colors module
• A perceptual color space for image processing on bottosson.github.io (2023)
• OKLAB color wheel on observablehq.com